• Bluetooth version: Bluetooth 5.1 dual mode
• Bluetooth Audio Codecs: apt-X, apt-X HD, apt-X Low Latency, SBC and AAC • Total Harmonic Distortion + Noise: 0.15%
• Bandwidth: 20Hz to 22KHz Passive limitation built in
• Power Supply: 10V to 18V (absolute max 18V DC) minimum current 3.0A. Connection via a 2.1mm DC connector centre positive, auto mute on under voltage.
• Fuse: self resetting 3A built in – to clear remove power for at least 20 seconds, clear fault and reconnect
• Amplifier Architecture: Class D
• Amplifier topology: Parallel full bridge mode all speaker connections are live ( no common ground connection)
• Recommended minimum speaker impedance: 4 ohms per speaker
• Absolute minimum impedance: 2 ohms per channel (2 x 4ohms )
• SNR: 102dB
• THD + N @ 1 kHz (%): 0.1
• Voltage gain: 33dB
• Input required to produce full output: approx 775mV
• Power output (15v supply): 22W RMS per channel into 4ohms
• Power output (12v supply): 15W RMS per channel into 4ohms

Contact us


K2Audio Ltd
28 Parker House
Mansfield Rd
Derby DE21 4SZ

See the full range


Follow Us