Quick Checklist
"I've connected my Commander to the network but I can't view the web page"
Check that your computer IP address is set correctly (see "IP_status")
Check that the firewall is temporarily disabled or correctly configured
"I'm trying to learn an IR code. I've clicked "learn" and got the red button but nothing happens when I press my remote control button"
Make sure that the IP address is set to the Commander you are using.
Make sure that the "attempt" to locate PC" box is checked within the options page.
Make sure that the PC's IP address is correctly configured within the modules configuration page.
Make sure that you have selected (and saved!) the "use on board receiver to send to PC" option
