Keene

IR Anywhere

Contents

Overview

Setup
Connections
Module Configuration

- Options
- Factory Default
- Send IR Codes
- Setup IR Codes
- Configuration
- Password

Operation
Module to Module

Java Program
Java Software Program
Locating the Modules
Learning IR Code Basic
Learning IR Code Adv
Activity Window
Learning IR Code Tips

Advanced
UDP Port
Firmware Update
Dynamic DNS
Port Forwarding

Troubleshooting
Quick Checklist
Reset

Other
Optional Accessories
Third Party Software
Software Developers

 

 

Optional Accessories

INPUT COMPONENTS

Fascia Mount IR Receiver 36 - 60kHz suitable for most domestic equipment.
IRFMR

Standard IR Receiver 36 - 40kHz suitable for most domestic equipment.
IRSR

Wide Band IR Receiver, 20- 120kHz for more esoteric equipment.
IRWBR

Standard IR Receiver wall plate. 36-40kHz suitable for most domestic equipment, built into a single gang faceplate
IRSP

Wideband IR Receiver wall plate. 20-120kHz suitable for most esoteric equipment, built into a single gang faceplate
IRSPW

Panel mount IR receiver. With a 30mm visible diameter they can be built into AV cabinets, studded walls and ceilings. Available in four finishes:
IRPMR (black)
IRPMRW (white)
IRPMRB (brass)
IRPMRC (chrome)

IR Link Cable that allows you to take the IR wand output from products such as the the IR Anywhere, C5QCA, IRBKIT, Powermid etc, and feed it directly into the IR receiver input on another Keene IR product. Length: 1.5m (3.5mm - 3.5mm tip & body only)
KLDE6M


Wand IR lead To feed the wand output from other IR extender equipment directly to the IR Commander wand input (2.5mm stereo jack plug to 3.5mm stereo jack plug 2.0m long). KLDE10M

OUTPUT COMPONENTS

Standard Close Range Emitter Wand. A small discreet emitter designed for short range operation. It flashes red as IR signal is emitted giving visual confirmation that the IR signal was received and transmitted correctly
IRBW1

Low Power Wand. Can be attached directly to the equipment fascia or will work up to 4 metres away. Even when attached directly the equipment will still respond to external IR signals. Only to be used in the IR Distribution Amp low power output sockets.
IRLPW

Side Firing Wand. A short range emitter for direct attachment to the equipment fascia. IRSFW

Dual Blinking Wands. The single jack plug drives two IR emitter wands. The emitters are extremely tiny (just 9mm across) and are supplied with double sided adhesive pads to affix directly to the equipment fascia. The emitters actually flash red as IR signal is emitted giving visual confirmation that the IR signal was received and transmitted correctly. IRDW

EXTENSION
Extension leads, 3.5mm stereo jack plug to 3.5mm stereo socket to be used on input or output as required. We've tested the input up to 10m and the output to 20m.
3m extension KLD40
5m extension KLD405
10m extension KLD4010

You can extend the input much further by using CAT5 cable and a pair of these adaptors