IR Control
The module can be used for IR control in one of two ways, either by aiming a remote control at the IR receiver connected to the IR input, or by directly connecting the IR blaster output from another device to the IR input.
Using an IR Receiver
Aim the remote control at the receiver and press a button.The IR receiver should give a confirmation flash that the signal has been received, the "data" LED on the module should flicker to indicate that data has been processed, and lastly the Sky system should respond in the same manner as if you has aimed the remote directly at it.
Direct IR connection
Connect the IR blaster output of your device to a Keene KIRT (IR Translator) and in turn connect that to the IR input on the module.