RS232 Verbose mode
By default the KIRAQ module will report back useful information to an RS232 terminal. For example this is what happens during the boot sequence and then when #cmdCTH192.168.100.217* is sent:
[boot]
**************************
HOST NAME:= CTRL4SKY
IP:= 192.168.100.241
MAC:= D8:80:39:A7:87:C4
2 CTRL4SKY module
Data port:= 65432
Subnet mask:= 255.255.255.0
Gateway:= 192.168.100.254
DNS1:= 192.168.100.254
DNS2:= 194.74.65.68
Selected Box type:= SKYHD box
Sky box IP:= 192.168.100.123
PC IP:= 192.168.100.162
DHCP:= on
1.04
Keene
Electronics
New IP address
[##cmdCTH192.168.100.217*]
ACK
Selected Box type:= SKYHD box
Sky box IP:= 192.168.100.217