Keene

KIRA 128 RS232

Contents

Overview

Setup
Connections
Module Configuration

- Options
- Factory Default
- Setup stored IR Codes
- Configuration
- Password

Operation
Browser Control
Module to Module

Java Program
Java Software Program
Locating the Modules
Learning IR Code Basic
Learning IR Code Adv
Activity Window
Learning IR Code Tips

Video Guides
Tutorial Clips

Advanced
Macro Commands
UDP Port
Firmware Update
Dynamic DNS
Port Forwarding
RS232 Control
RS232 X10 Control
Shadowfile

Troubleshooting
Quick Checklist
Reset

Other
Optional Accessories
Third Party Software
Software Developers

 

 

Optional Accessories


OUTPUT COMPONENTS

Standard Close Range Emitter Wand. A small discreet emitter designed for short range operation. It flashes red as IR signal is emitted giving visual confirmation that the IR signal was received and transmitted correctly
IRBW1

Low Power Wand. Can be attached directly to the equipment fascia or will work up to 4 metres away. Even when attached directly the equipment will still respond to external IR signals. Only to be used in the IR Distribution Amp low power output sockets.
IRLPW

Side Firing Wand. A short range emitter for direct attachment to the equipment fascia. IRSFW

Dual Blinking Wands. The single jack plug drives two IR emitter wands. The emitters are extremely tiny (just 9mm across) and are supplied with double sided adhesive pads to affix directly to the equipment fascia. The emitters actually flash red as IR signal is emitted giving visual confirmation that the IR signal was received and transmitted correctly. IRDW

EXTENSION
Extension leads, 3.5mm stereo jack plug to 3.5mm stereo socket to be used on input or output as required. We've tested the input up to 10m and the output to 20m.
3m extension KLD40
5m extension KLD405
10m extension KLD4010