Optional Accessories
OUTPUT COMPONENTS
Standard Close Range Emitter Wand. A small discreet emitter designed for short range operation. It flashes red as IR signal is emitted giving visual confirmation that the IR signal was received and transmitted correctly
IRBW1
Low Power Wand. Can be attached directly to the equipment fascia or will work up to 4 metres away. Even when attached directly the equipment will still respond to external IR signals. Only to be used in the IR Distribution Amp low power output sockets.
IRLPW
Side Firing Wand. A short range emitter for direct attachment to the equipment fascia. IRSFW
Dual Blinking Wands. The single jack plug drives two IR emitter wands. The emitters are extremely tiny (just 9mm across) and are supplied with double sided adhesive pads to affix directly to the equipment fascia. The emitters actually flash red as IR signal is emitted giving visual confirmation that the IR signal was received and transmitted correctly. IRDW
EXTENSION
Extension leads, 3.5mm stereo jack plug to 3.5mm stereo socket to be used on input or output as required. We've tested the input up to 10m and the output to 20m.
3m extension KLD40
5m extension KLD405
10m extension KLD4010
RS232
RS-232 socket to 3.5mm stereo jack plug cable for use with the Keene KIRARS232 and KIRACC modules. Cable length: 50cm KLD80